Object data
brass, wood and paper
height 95.5 cm × width 357 cm × depth 73 cm
Koninklijke Fabriek voor Stoom- en andere Werktuigen
Model of Part of a Floating Dry Dock
Amsterdam, 1877 - 1878
Inscriptions
- inscription, on a brass plaque: Model op 1/20 van een gedeelte van het / YZEREN DRYVEND DOK / VOOR DE DIENST DER MARINE OP ONRUST IN OOST INDIE / Vervaardigd door de Koninklijke fabriek van / Stoom en andere Werktuigen / Amsterdam / 1878
Conservation
- Restauratieatelier Scheepsmodellen, 2000: restored
Provenance
...; transferred from the Ministerie van Marine (Department of the Navy), The Hague, to the museum, 1883
Object number: NG-MC-1411
Copyright: Public domain
Entry
Model of part of a floating dry dock.
The model shows part of one half of the dock. It is made entirely of brass, the construction consisting of angle iron frames with diagonal trussing and reinforced with bulkheads. Bulkheads divide the bottom into flooding compartments. The side compartments, which become wider at the base, remain dry and contribute to the stability. The model has a steam engine with a Cornish boiler with Galloway pipes on the upper deck underneath the awning that drives two centrifugal pumps below, which empty out the flooding compartments. Horizontal trusses operated by means of winches on deck served to get the ship in the right position, which was then supported by hinged trusses and blocks.
The model was shown at the Exhibition Universelle of 1878 in Paris. The iron dry dock represented by this model was made by order of the Dutch government by the Koninklijke Fabriek van Stoom en Andere Werktuigen of J. van der Made in Amsterdam in 1876. It was 100 metres long and had a carrying capacity of 4,800 tons. It was taken apart and shipped to Surabaya in 1879, where it was assembled again and towed to the island of Onrust to assist the old dry dock (NG-MC-1187).
Scale (on model) 1:20.
Literature
B.J. Tideman, Memoriaal van de Marine, bevattende opgaven betrekkelijk de afmetingen, constructie, ... van Nederlandsche oorlogsschepen en omtrent enige havens, dokken, sluizen, werven enz., Amsterdam 1876-80, 2de afd., p. 154, pl. 24, fig. 21; A. van Oosterzee (ed.), De wereldtentoonstelling van 1878 te Parijs, Amsterdam 1878, p. 218; A.A. Lemmers, Techniek op schaal. Modellen en het technologiebeleid van de Marine 1725-1885, Amsterdam 1996, pp. 289-90; J.M. Obreen et al., handwritten inventory list for items 944 to 1431, 1884, manuscript in HNA 476 RMA, inv. no. 1089, no. 1411; A.A. Lemmers, ‘Het oog op Onrust’, Marineblad 109 (1999), no. 6, pp. 260-69; A.J. Hoving, Message in a Model: Stories from the Navy Model Room of the Rijksmuseum, Florence, OR 2013, pp. 224-27
Citation
J. van der Vliet, 2016, 'Koninklijke Fabriek voor Stoom- en andere Werktuigen, Model of Part of a Floating Dry Dock, Amsterdam, 1877 - 1878', in J. van der Vliet and A. Lemmers (eds.), Navy Models in the Rijksmuseum, online coll. cat. Amsterdam: hdl.handle.net/10934/RM0001.COLLECT.245215
(accessed 14 November 2024 03:53:43).